{"title":"Dinan","description":"\u003ch1 style=\"text-align: center;\"\u003eDinan\u003c\/h1\u003e\n\u003cp\u003eDinan has tuned BMWs since 1979, with a lineup spanning carbon intakes and turbo inlet pipes, adjustable coilovers and anti-roll bars, suspension link kits, ignition coils, and exhaust systems, covering chassis from E9X through current F and G series.\u003c\/p\u003e","products":[{"product_id":"dinan-f10-m5-intake-kit","title":"Dinan Intake Kit - BMW F10 M5","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eThe F10 M5 Dinan high flow carbon fiber cold air intake, like most Dinan products, has a sleek and functional appearance that embodies high performance. The F10 M5 cold air intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The M5 cold air intake system was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom-designed intake assembly with a larger than stock metered air flow housing and a Dinan conical air filter with a 77% larger capacity. Dinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increases engine performance, even more so if combined with other performance-enhancing Dinan products.\u003cbr\u003e\u003cbr\u003eThe F10 M5 Cold Air intake is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is not legal for sale or use in California or states that have adopted California emissions standards, on any pollution-controlled motor vehicles. \u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits of Dinan's Cold Air Intake:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Maximum peak power of 693 HP and 651 lb-ft of Torque utilizing Dinan Stage 2 components (DINAN\u003cstrong data-mce-fragment=\"1\"\u003eTRONICS\u003c\/strong\u003e Performance Tuner, intake, and exhaust). A difference of 13 HP and 7 lb-ft of Torque from Dinan Stage 1 (D-TRONICS Performance Tuner Only).\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Dinan proprietary Injection molded Dinan MAF housings are larger than stock\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Stock air filters are replaced with 77% larger Dinan conical air filters.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Entire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Stock System Stays Completely Functional\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Carbon fiber air box lids and intake ducts\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Raised Dinan logos are laminated into the carbon fiber intake\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Rubber hoses, mounting brackets, \u0026amp; hardware included.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42603662409974,"sku":"D760-0035","price":2199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/4e4d098f504756491c65cddb02ce7e59_2048x2048_f8a31a86-4492-4a3b-b680-7ea1a4c8cd7f.jpg?v=1645533697"},{"product_id":"dinan-g30-m550i-lowering-spring-set","title":"Dinan Lowering Spring Set - BMW G30 M550i","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eSuspension systems that not only transform the stance of the vehicle but also maintain ride quality and improve upon handling are what Dinan suspensions are known for. This is accomplished by pairing springs sets with bump stops, spring perches, or both to maintain suspension travel resulting in a smooth ride while also improving mechanical grip and handling. This is what makes Dinan suspension systems unique. While we are able to sell each component separately it is highly recommended that both the spring sets and the supplemental ride quality and handling kits are used in tandem in order to maintain the Dinan quality standards our customers are used to. Experience the Dinan difference with this combination and enjoy the ride it provides.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eDinan's Performance Spring set for the G30 M550i provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the car for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot-peened for stress relief to last the life of the car. The increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip, for high-speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits of the Dinan Performance Spring Set for the G30 M550i:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003e15% increase in spring stiffness in front and rear.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eLowers the vehicle 3\/4\" in the front and rear.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eTo fully enjoy Dinan performance spring sets we highly recommend pairing them up with our supplemental ride quality and handling kits. This additional kit includes tuned, progressive rate bump stops that maximize suspension travel on the lowered car for improved handling capabilities and ride quality when compared to just a spring set. By allowing for full compression travel within the spring the possibility of a sudden \"bottoming out\" is negated, a common unwanted side effect when lowering a vehicle.  Bump stops also have the added benefit of optimizing the spring rate rewarding those that use them with added mechanical grip and cornering power. Simply put, the Dinan supplemental ride quality and handling kits amplify performance and comfort when paired with performance spring sets.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTICE:\u003c\/strong\u003e Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While Dinan will maintain a full warranty on product defects, any claims against the car’s improper handling\/ride quality traits due to not purchasing the corresponding handling kit will not be warranted\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"No","offer_id":42603747672310,"sku":"D100-0932","price":329.95,"currency_code":"USD","in_stock":true},{"title":"Yes (D193-3071)","offer_id":42603747705078,"sku":"D100-0932","price":479.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d100-0932_1024x1024_8d1da9d3-0eb3-455c-baf1-90406070a35b.jpg?v=1645534027"},{"product_id":"dinan-f87-m2-dual-core-intercooler","title":"Dinan Dual Core Intercooler - BMW F87 M2","description":"\u003cdiv class=\"product_desc_title\" data-mce-fragment=\"1\"\u003e\u003cspan data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eDinan's unique dual-core intercooler design for the F87 M2 engine promotes impressive pressure drops and a wider power band along with astounding cooling characteristics that nearly guarantee 'heat soak' a thing of the past. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"product_desc_title\" data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"product_desc_title\" data-mce-fragment=\"1\"\u003eMore heat in turn robs some of the power you just gained. A larger high-performance intercooler combats the heat and those power gains are protected. The Dinan dual core intercooler provides a 278% increase in face area along with an equally impressive increase in volume, substantially reducing the pressure drop to 0.8 psi, as well as providing for more efficient heat exchange and more consistent output power. Dinan's unique dual-core design allows 2 separate cores to be working in conjunction with one another at all times. This doubling of resources is directly responsible for a 39% improvement in the delta from charge air temperature to ambient temperature (See diagrams below). \"Cool down\" time is also significantly reduced, enabling the cars to produce full power under varying driving conditions such as stop-and-go traffic. This leaves the chances of being susceptible to heat soak nearly a thing of the past.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_desc_para\" data-mce-fragment=\"1\"\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eThe system has been engineered to be as direct a replacement as possible to the stock unit, requiring only minor modifications for a clean, factory-like installation. The increased thermal efficiency provided by the Dinan dual core intercooler will also enhance turbocharger reliability in addition to overall power.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits of the Dinan High-Performance Dual Core Intercooler for the F87 M2:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Max gains of 7 HP and 5 lb-ft of torque on a stock car.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Face area  278% larger than the stock intercooler setup for maximum cooling efficiency to deter heat soak.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Charge Air Pressure drop: 0.80 PSI (69% improvement over stock)\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Charge Air Temperature drop: 193º F (9% improvement over stock)\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Charge Air Temperature \/ Ambient Temperature Delta: 25º F @ 6250 RPM (39% improvement over stock)\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604093374710,"sku":"D330-0026","price":1049.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d330-0026_2_1024x1024_9cd287bb-50ff-4ac1-b5db-641f61027d47.jpg?v=1645535075"},{"product_id":"dinan-f87-m2-adjustable-coilover-kit","title":"Dinan Adjustable Coilover Kit - BMW F87 M2","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eFor the driver that demands the best out of their vehicle.  The Dinan Adjustable Coil-Over Suspension was bred in the race lab but refined on the street for maximum versatility. No matter the environment, the traction that is bestowed upon the vehicle from the improved suspension will inspire newfound confidence when running at higher speeds. Combined with a substantial reduction in body roll as well as reducing dive under braking and squat under acceleration. Dinan will guarantee you superior handling, performance, and comfort. Dinan's design implements threaded collars to allow the user to change the ride height. The end result is a sleek lowered stance that provides improved handling to go along with its stunning visual appearance. The springs combined with progressive bump stops and other components increase travel that allows the car to be lowered up to 1\" in the front and 1-1\/2\" in the rear. Suspension packers are included to fine-tune handling and comfort by changing the clearance of the progressive bump stops, something no respectable racecar is without. Components are machined from 6061-T6 aluminum and black anodized for appearance and corrosion protection.  \u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits of Dinan's High-Performance Adjustable Coil-Over Suspension System:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eThreaded collars allow easy and precise front \u0026amp; rear vehicle height adjustments.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eUp to 1\" of lowering in front and 1 1\/2\" of lowering in the back are possible depending on tire clearance although a 3\/4\" drop in front and a 1\/2\" drop in the rear is recommended to maintain a civilized ride.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpring rates are nearly 18% stiffer in front and 5% stiffer in the rear.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eHelper Springs are used in the rear to maintain proper suspension operation under droop conditions.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eSubstantial reduction in body roll.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncluded suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eDinan-spec progressive bump stops improve ride quality at lowered ride heights.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eComponents are machined from 6061-T6 aluminum and black anodized for a sporty appearance as well as corrosion protection. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eStock upper spring mounts are utilized for quiet operation.\u003c\/span\u003e\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604147507446,"sku":"D190-8701","price":1469.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d190-8701_2_1024x1024_36681825-b313-441d-82eb-27dff0ba8519.jpg?v=1645535233"},{"product_id":"dinan-ignition-coils-bxx-series-style","title":"Dinan Ignition Coils - BMW Bxx Series","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and\/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eThe B series style coil applies to the following engines: B36, B38, B46, B48, B58, and S58.\u003cbr\u003e\u003cbr\u003eCompatible OEM Part #Cross Reference: 12138643360, 12137619385, 12138678438 and 750990012.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eUp to 10% more energy output than stock.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eMultiple color options to choose from (black, red, and blue).\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eHousings are branded with a Dinan Logo for easy identification.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eTrue upgrade, not just aesthetic.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eDirect plug-and-play.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Black (D650-0008)","offer_id":42604244861174,"sku":"D650-0008","price":34.95,"currency_code":"USD","in_stock":true},{"title":"Red (D650-0009)","offer_id":42604244926710,"sku":"D650-0008","price":34.95,"currency_code":"USD","in_stock":true},{"title":"Blue (D650-0010)","offer_id":42604244959478,"sku":"D650-0008","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/Dinan-Bxx-IC_1024x1024_93c96252-93bb-4dd2-985c-2306b0ed85fb.jpg?v=1645535547"},{"product_id":"dinan-ignition-coils-mxx-series-style","title":"Dinan Ignition Coils - BMW Mxx Series","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and\/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe M series style coil applies to the following engines: M52, M54, M62, M73, S52, and S62. Please note however that some M54 applications split-coil styles between M or N depending on vehicle production date. Cars produced up to 09\/2002 will use the M series style coil whereas vehicles produced after 09\/2002 will use N series style coils. Please visually compare\/verify the correct coil prior to purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatible OEM Part #Cross Reference: 12137599219, 12131748018, and 12139067830.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eUp to 10% more energy output than stock.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eMultiple color options to choose from (black, red, and blue).\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eHousings are branded with a Dinan Logo for easy identification.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eTrue upgrade, not just aesthetic.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eDirect plug-and-play.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Black (D650-0005)","offer_id":42604344836342,"sku":"D650-0005","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Red (D650-0006)","offer_id":42604344901878,"sku":"D650-0005","price":28.95,"currency_code":"USD","in_stock":true},{"title":"Blue (D650-0007)","offer_id":42604344934646,"sku":"D650-0005","price":28.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d650-0007_1_1024x1024_0001723d-fda4-4d70-9a6f-2075693cf3b1.jpg?v=1645535791"},{"product_id":"dinan-ignition-coils-nxx-series-style","title":"Dinan Ignition Coils - BMW Nxx Series","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and\/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe N series style coil applies to the following engines: M54, S54, N14, N18, N20, N26, N52, N54, N55, N62, N63, N73, N74, S55, and S63. Please note however that some M54 applications split-coil styles between M or N depending on vehicle production date. Cars produced up to 09\/2002 will use the M series style coil whereas vehicles produced after 09\/2002 will use N series style coils. Please visually compare\/verify the correct coil prior to purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatible OEM Part #Cross Reference: 12138616153, 12138647689, 12138611236, 12138657273, 12120039634, 12120039664, 12130148594, 12131712219, 12137575010, 12137594596, 12137594937, 12137594938 and 02215044708.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eUp to 10% more energy output than stock.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eMultiple color options to choose from (black, red, and blue).\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eHousings are branded with a Dinan Logo for easy identification.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eTrue upgrade, not just aesthetic.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eDirect plug-and-play.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Black (D650-0002)","offer_id":42604453134582,"sku":"D650-0002","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Red (D650-0003)","offer_id":42604453167350,"sku":"D650-0003","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Blue (D650-0004)","offer_id":42604453200118,"sku":"D650-0004","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d650-0003_3_1024x1024_ec832763-8772-4bcd-b0ec-b07429d7f622.jpg?v=1645536035"},{"product_id":"dinan-f90-m5-adjustable-coilover-suspension-system","title":"Dinan Adjustable Coilover Suspension System - BMW F90 M5","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFor the driver that demands the best out of their vehicle. The Dinan Adjustable Coil-Over Suspension was bred in the race lab but refined on the street for maximum versatility.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eFor the driver that demands the best out of their vehicle. The Dinan Adjustable Coil-Over Suspension was bred in the race lab but refined on the street for maximum versatility. No matter the environment, the traction that is bestowed upon the vehicle from the improved suspension will inspire newfound confidence when running at higher speeds. From the substantial reduction in body roll as well as reduction of dive under braking and squat under acceleration, Dinan guarantees you superior handling, performance, and comfort.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eDinan's design retains the superb factory electronic shocks but swaps the springs to a more aggressive formula and implements threaded collars to allow the user to change the ride height. While a stiffer spring is typically associated with diminished ride quality Dinan has also swapped the progressive rate rear springs in favor of a much more predictable linear rate spring design. This allows for a more compliant feel while still being able to enjoy the benefits of a stiffer setup such as the reduction in body roll. The end result is a sleek lowered stance that provides improved handling to go along with its stunning visual appearance. The springs combined with progressive bump stops and other components increase travel that allows the car to be lowered an incredibly low 2\" in the front and 2-1\/8\" in the rear. However, in order to retain the ride quality synonymous with Dinan suspension kits the recommended drop of 1\" in front and 1-1\/8\" in the rear is advised. For suspension connoisseurs or those that are just simply very particular, suspension packers are included to fine-tune handling and comfort by changing the clearance of the progressive bump stops, something no respectable racecar is without.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits of Dinan's High-Performance Adjustable Coil-Over Suspension System for the BMW F90 M5:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eThreaded collars allow easy and precise front \u0026amp; rear vehicle height adjustments.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eUp to 2\" of lowering in front and 2-1\/8\" of lowering in the back are possible depending on tire clearance but with diminished ride quality.  Dinan recommends a 1\" drop in front and a 1-1\/8\" drop in the rear to maintain a civilized ride.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eSpring rates are 20% stiffer in front and 15% stiffer in the rear. Stock rear springs are progressive whereas the Dinan springs are linear. \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eHelper springs are utilized in the front and rear to maintain proper suspension operation under droop conditions as well as accommodate the extensive travel of the stock shocks.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eSubstantial reduction in body roll.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eIncluded suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eDinan-spec progressive bump stops improve ride quality at lowered ride heights.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eComponents are machined from 6061-T6 aluminum and black anodized for a sporty appearance as well as corrosion protection. \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+ \u003c\/strong\u003eStock upper spring mounts are utilized for quiet operation.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e*\u003c\/em\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote:\u003c\/strong\u003e Due to the extensive lowering possible, and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604559892726,"sku":"D190-0901","price":1499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/D190-0901_1_1024x1024_cf440936-5fbc-4e55-9835-3df42101d8fc.jpg?v=1645536320"},{"product_id":"dinan-f90-m5-rear-suspension-link-kit","title":"Dinan Rear Suspension Link Kit - BMW F90 M5","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eDinan’s high-performance Rear Suspension Link Kit adds precision and predictability at the limit.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eThe stock rear toe link setup is built with rubber bushings and a curved forged alloy rod that can easily flex. During hard acceleration and braking, this flex allows the rear wheels to have excessive toe change which ultimately causes the car to be unstable. Dinan stops the flex by replacing the rubber bushings with Teflon-lined machined steel rod ends that significantly reduce pliability while also swapping out the OEM curved bar with a stouter billet aluminum arm, thus adding stability.  Like the rear toe links, the stock front trailing links also incorporate rubber bushings. Flex in these bushings allows the rear wheels to behave sloppily under heavy loads.  Dinan adds precision by replacing these links with billet aluminum arms and precision ball joints just like the ones found in the Dinan front monoball kit. \u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eHave confidence in your F90 M5 when pushing the envelope without the worry of erratic suspension play or sacrificing ride quality and comfort. Whether it be at the drag strip doing quarter-mile runs or simply getting the jump off the line at a stoplight the end result with Dinan's Rear Suspension Link Kit is more stable and planted driving experience when pushing the car to its limits. \u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits of the Dinan  Rear Suspension Link Kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eReplaces the stock rear toe link \u0026amp; rubber bushings with a precision machined black-anodized aluminum arm and racing-quality rod ends.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Rod-ends are Teflon-lined for quiet operation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Rubber boots protect rod ends from environmental damage for long-lasting performance and removes the need for constant cleaning. \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eReplaces the stock forward lower trailing link \u0026amp; rubber bushings with a precision machined black-anodized aluminum arm and precision ball joints.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Bearings are nylon-lined for quiet operation. \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eDramatically improves vehicle stability during hard cornering.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eImproves response by eliminating the deflection of the rubber bushings.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604620841206,"sku":"D280-0020","price":1312.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/Dinan_Rear_Suspension_Link_kit_for_F90_M5_7_1024x1024_3f27f9f1-bcf4-4899-88a6-0401b0cbc400.jpg?v=1645536491"},{"product_id":"dinan-e9x-m3-adjustable-camber-plate-set","title":"Dinan Adjustable Camber Plate Set - BMW E9X M3","description":"\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003eBy improving the grip in your turns, your entire driving experience will change. Get the absolute most out of your BMW with the Dinan E9X M3 Adjustable Camber Plate Set. These plates shift the range of the stock adjuster by -0.7 degrees, providing for a much more aggressive negative camber setting. For an extra perk, drivers will benefit greatly from the reduced outside edge tire wear. For a BMW that drives as smoothly as possible, the Dinan E9X M3 Adjustable Camber Plate Set is the way to go.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e• Shifts Stock Adjuster\u003cbr data-mce-fragment=\"1\"\u003e• Drastically Improved Mechanical Grip During Cornering \u003cbr data-mce-fragment=\"1\"\u003e• Reduce Understeer \u003cbr data-mce-fragment=\"1\"\u003e• Up to -0.7 Deg More Negative Camber\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604870041846,"sku":"D160-0003","price":188.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/8581187412_5afeea486b_b_2048x2048_5062212a-d087-49ef-867a-5147233fe4be.jpg?v=1645537654"},{"product_id":"dinan-f90-m5-tension-strut-ball-joint-kit","title":"Dinan Tension Strut Ball Joint Kit - BMW F90 M5","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eAn underrated component of a proper driver's suspension, the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after.  Drivers wanted the visceral feel of being connected to the road as the road racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned  BMW experience. \u003cbr\u003e\u003cbr\u003eThe Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProduct Details: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eImproved Steering Responsiveness\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eReduces Brake Shimmy\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eNylon-lined Bearings for Quiet Operation\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eMachined Aluminum Housings\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eSealed Bearings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604897534198,"sku":"D280-0019","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/Tension_Strut_Ball_Joint_Kit_for_BMW_F90_M5_2_1024x1024_7536ac2b-333b-4083-a4e5-a83109b673bf.jpg?v=1645537893"},{"product_id":"dinan-e9x-m3-high-flow-carbon-intake-kit","title":"Dinan High Flow Carbon Intake Kit - BMW E9X M3","description":"\u003cp\u003e\u003cbr\u003e\u003cbr\u003eUnlock the full breathing potential of your E9X M3’s legendary S65 V8 with the Dinan High Flow Carbon Fiber Intake. Engineered with premium materials and precision design, this intake delivers a significant airflow improvement while adding a refined motorsport aesthetic under the hood. The system features a beautifully crafted carbon fiber connecting pipe paired with injection-molded rubber boots, all sealed from under-hood heat using Dinan’s custom-molded divider plate. This divider includes an integrated high-flow passage that mates seamlessly with the factory airbox to keep intake air cool and consistent—even under aggressive driving.\u003c\/p\u003e\n\u003cp\u003eWhat sets this intake apart is its intelligent design and thermal efficiency. Carbon fiber and high-grade plastics were chosen not only for their structural benefits but also their insulating properties, allowing the components to resist heat soak and cool down more rapidly than metal intake systems. With a 30% increase in cross-sectional area and a large free-flowing cotton gauze filter, the Dinan intake ensures the S65 has the airflow it needs at high RPM—delivering measurable gains of up to 8 horsepower and 5 lb-ft of torque at 8200 rpm. The result is sharper throttle response, improved top-end breathing, and a deeper induction sound that enhances every drive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e30% larger cross-sectional area vs. stock\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignificantly reduced heat soak\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImproved airflow and power throughout the rev range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e+8 HP \/ +5 lb-ft torque @ 8200 rpm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLightweight carbon fiber intake tube\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge high-flow cotton gauze filter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePremium OEM-level fit and finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604922437878,"sku":"D760-0028","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/5839171993_6e5aa147d2_b_1024x1024_d5cd4609-5961-48e5-b09f-956c09e9178d.jpg?v=1645538099"},{"product_id":"dinan-e9x-m3-carbon-front-strut-tower-brace-set","title":"Dinan Carbon Front Strut Tower Brace Set - BMW E9X M3","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eThe Dinan carbon fiber strut tower braces are built from aerospace quality aluminum and carbon fiber. The amazingly strong carbon fiber rods are held in place with black powder-coated forged aluminum ends connecting to the stock mounts. Replacing the bare aluminum tube with this beautiful piece will improve chassis rigidity while also cleaning up the look of the engine by framing it in carbon fiber. The beautiful carbon fiber braces may be installed in conjunction with any of the Dinan suspension systems or the stock components and feature carbon fiber that matches the high flow carbon fiber intake in color and weave.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits:\u003cbr data-mce-fragment=\"1\"\u003e+ Aerospace Quality Carbon Fiber \u0026amp; Aluminum\u003cbr data-mce-fragment=\"1\"\u003e+ Mounts In Stock Location\u003cbr data-mce-fragment=\"1\"\u003e+ Improved Chassis Rigidity\u003cbr data-mce-fragment=\"1\"\u003e+ Carbon Fiber Weave Matches High Flow Intake\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604961792246,"sku":"D180-0011","price":545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/8531860934_b33a42416b_b_2048x2048_d0407adb-1d2b-4859-b1d9-2a9581f4880c.jpg?v=1645538540"},{"product_id":"dinan-f8x-m2-m3-m4-rear-suspension-link-kit","title":"Dinan Rear Suspension Link Kit - BMW F87 M2\/ F80 M3\/ F82\/ F83 M4","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eDinan’s high-performance Rear Suspension Link Kit adds precision and predictability at the limit.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eThe stock rear toe link is built with rubber bushings and a curved forged alloy rod that can easily flex. During hard acceleration this flex allows the rear wheels to have excessive toe change under hard acceleration and braking. All of this flex in the stock toe link causes the car to be unstable.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eDinan stops the flex by replacing the rubber bushings with Teflon-coated machined steel rod ends and the OEM curved bar with a straight billet aluminum rod, thus adding stability. The Dinan rod-ends incorporate left and right-hand thread, which allows quick and accurate toe adjustment that is tough to achieve using the stock system. Like the rear toe links, the stock front trailing links also incorporate rubber bushings.  Flex in these bushings allows the rear wheels to behave sloppily under heavy loads.  Dinan adds precision by replacing these links with billet aluminum rods and Teflon-coated machined steel rod ends.  These front links are not adjustable, because there is no need to do so.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits of the Dinan Racing Rear Suspension Link Kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Replaces the stock rear toe link \u0026amp; rubber bushings with a precision machine black-anodized aluminum tube and racing-quality rod ends.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Replaces the stock forward lower trailing link \u0026amp; rubber bushings with a precision machine black-anodized aluminum tube and racing-quality rod ends.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Dramatically improves vehicle stability during hard cornering.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Improves response by eliminating the deflection of the rubber bushings.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Rod-ends are Teflon-lines for quiet operation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Rod-ends incorporate left and right-hand thread, which allows quick and accurate toe adjustment by simply turning the aluminum tube. This eliminates the need to struggle with the factory eccentric adjustment.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Only rear toe links are adjustable. Trailing links are not adjustable.\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Rubber boots protect rod ends from environmental damage for long-lasting performance and remove the need for constant cleaning. \u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604966052086,"sku":"D280-0015","price":1081.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d280-0015_2048x2048_1bb133f9-493f-4b72-97ed-2412d574e91b.jpg?v=1645538729"},{"product_id":"dinan-f85-x5m-f86-x6m-carbon-cold-air-intake","title":"Dinan Carbon Cold Air Intake - BMW F85 X5M\/ F86 X6M","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStriking'\u003c\/em\u003e is the first word that comes to mind when you pop the hood of an F8X X5M\/X6M with a Dinan carbon fiber cold air intake system. The underhood appearance is completely changed and set off by intricate carbon detailing that makes the engine compartment just as flattering as the sleek exterior lines the vehicle possesses. While the aesthetics are the most recognizable change to the system what is more impressive is the functionality that lies beneath the carbon fiber lid.\u003cbr\u003e\u003cbr\u003eThe care that went into the filter design is what makes the system function as well as it does. The stock filters are restrictive with only a minuscule 89in² in the total filter area. The stock filters also only allow air to be drawn in from the front and rear instead of around the entire surface area. Dinan's custom filters on the other hand eliminate this wasted area and allow air to be drawn in from all around and increase the total filter area to 292.4in². That's unheard of a 228% increase in filter area over the stock setup. In order to accomodate these massive filters the stock lid needed to be enlarged as much as the hood clearance would allow. This gave us the opportunity to implement its signature carbon fiber look and appeal while also increasing the overall volume of the airbox by ~15%. The increased volume of the airbox allows the larger filters to ingest more air at any given moment and elicit a slightly more audible and sporty tone over its stock counterpart. This optimized design yields increased HP\/TRQ throughout the power band and shows consistent gains over stage 1 when combined with the stage 2 DINAN\u003cstrong data-mce-fragment=\"1\"\u003eTRONICS\u003c\/strong\u003e Performance Tuner.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits of the Dinan Carbon Fiber High Flow Air Intake for the F85 X5M and F86 X6M:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e More Power: Max gains of 23 HP @ 5500 RPM and 25 lb-ft of torque @ 4000 RPM  when combined with the Stage 2 DINAN\u003cstrong data-mce-fragment=\"1\"\u003eTRONICS\u003c\/strong\u003e Performance Tuner and exhaust over stage 1 tuning. \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Sportier Sound\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Improved throttle response\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e ~15% Larger volume airbox via a Carbon Fiber lid that allows for the spacing needed for the larger filters. \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e 228% increase in filter area (stock: 44.5in² each, Dinan: 146.2in² each)  \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Dinan filters draw air in from all around versus the stock filters which only draw from the front and back of the filter. \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Bolt-on installation\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e**\u003cspan data-mce-fragment=\"1\"\u003eDue to limited production capacity the F85\/F86 X5M\/X6M carbon fiber cold air intake is highly susceptible to backorders. New orders placed today would not see shipment for 4 weeks.\u003c\/span\u003e\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604970017014,"sku":"D760-0047","price":1259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d760-0047_2_2048x2048_d947593e-bbca-4ad3-8c8d-7268a65c0713.jpg?v=1645538950"},{"product_id":"dinan-f95-x5m-f96-x6m-carbon-cold-air-intake","title":"Dinan Carbon Cold Air Intake - BMW F95 X5M\/ F96 X6M","description":"\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cbr\u003eBeing the quintessential performance SUV in the marketplace, the X5M is the perfect canvas to showcase a work of art for the entire enthusiast community to see. Creating an indelible mark upon the vehicle, and in particular, the engine bay, the Dinan carbon fiber cold air intake is not just a work of art but a piece worthy of bearing the label of \"masterpiece.\"\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eWith gloss UV-coated carbon fiber stretching from the front of the engine compartment to the rear, it's hard not to be impressed by the sheer volume of carbon. The majority of it is comprised of a fully functional secondary air inlet which doubles as an ornate engine cover. As such, signature BMW engine cover design elements signifying the cylinder count are integrated into the design for factory-like continuity and a nod to a long history. The cosmetic beauty of the system does not solely derive from the presence of carbon, however. The immense central passage also purposefully bisects the engine compartment to ensure the factory bracing, which is impressive on its own, is visible. With both OEM and Dinan elements showcased simultaneously the overall engine bay retains symmetrical harmony and commands attention at all corners.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eBeyond outward appearances and upon closer inspection details emerge which showcase the level of care taken in the intake systems design beyond simply aesthetics. For instance, the secondary air source is deriving its contents from an unobtrusive central hood scoop located behind the front grilles that feed into the newly formed inlet hump at the front of the engine bay. Through constant CFD analysis, the design of the scoop and secondary inlet continually underwent improvements in order to meet the demand of an even and unagitated air supply to each air box. In its final form, accents in the carbon both provided a visual embellishment as well as created the outward manifestations of the runners used to direct and smooth the secondary airflow. The additional airflow ultimately supplements the factory inlet locations on both the left and right air boxes with ambient air from outside of the engine compartment. These airboxes have been enlarged and equipped with massive filters to handle this increased volume and together with the rest of the system allow the intake to flow as efficiently as possible.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eWhile the stock intake system is adequately suited to support up to stage 1 power levels that do not mean there is no performance benefit when upgrading to the Dinan system. Besides its jaw-dropping appearance the biggest advantage of the system, by virtue of additional and optimized flow, is the reduction of the pressure depression in the stock system. This equates to the turbo having to work less in order to achieve targeted power. With the turbo working more efficiently this also means lower pre-turbine backpressure, lower turbocharger shaft speeds, lower turbocharger compressor discharge temperatures, and the ability to achieve higher boost pressure levels. Paired with the natural improvement to throttle response, a bump to the acoustics, and an unequaled visual appeal the Dinan F9x X5M\/X6M carbon fiber intake system can wear the self-appointed moniker of \"masterpiece\" without trepidation.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eCarbon Fiber overload – the good kind.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eCenter inlet\/scoop doubles as a visually pleasing carbon-fiber engine cover.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eIncreased turbo efficiency, reliability, and headroom.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eMore Flow: 10% greater than stock (Stock: 575 CFM, Dinan: 630 CFM @ 30\" H2O per bank).\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eIncreased sound for aural satisfaction at full load.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eImproved throttle response.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e86% increase in inlet cross-sectional area via the center inlet\/scoop (secondary inlet) for maximum airflow.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eLarger volume airboxes (56% larger than stock) that completely seal allowing an increased volume of air to be utilized.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e46% increase in filter area (stock: 51in², Dinan: 82in² per side) for optimum flow.\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"F95 X5M | F96 X6M Pre-LCI (S63TU4)","offer_id":47375919415542,"sku":"D760-0056","price":2299.95,"currency_code":"USD","in_stock":true},{"title":"F95 X5M | F96 X6M LCI (S68)","offer_id":47375919448310,"sku":"D760-0056","price":2299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/Dinan-F95-1_2048x2048_91669e75-00e0-4d68-a050-e119c4d58493.jpg?v=1645539301"},{"product_id":"dinan-f8x-m2-m3-m4-tension-strut-ball-joint-kit","title":"Dinan Tension Strut Ball Joint Kit - BMW F87 M2\/ F80 M3\/ F82\/ F83 M4","description":"\u003cdiv class=\"product_desc_title\" data-mce-fragment=\"1\"\u003eThe Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_desc_para\" data-mce-fragment=\"1\"\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr\u003eBenefits of the Dinan Tension Strut Ball Joint Kit for the F80 M3 \u0026amp; F82 F83 M4:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\n\u003cp data-open-accessibility-text-original=\"16px\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Improved Steering Responsiveness\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Reduces Brake Shimmy\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Nylon-lined Bearings for Quiet Operation\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Machined Aluminum Housings\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Sealed Bearings\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42605005865206,"sku":"D280-0017","price":540.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d280-0017_2048x2048_fc63db3e-940b-4e12-ad2c-a21b012cfb46.jpg?v=1740645225"},{"product_id":"dinan-f95-x5m-f96-x6m-high-flow-carbon-intake-replacement-filter","title":"Dinan High Flow Carbon Intake Replacement Filter - BMW F95 X5M\/ F96 X6M","description":"\u003cp\u003eDinan High Flow Carbon Intake Replacement Filter - F95 X5M \/ F96 X6M from Dinan is a precision BMW performance upgrade from the most respected name in BMW tuning in North America. Dinan has been developing performance upgrades specifically for BMW vehicles for over 40 years, earning a unique distinction in the aftermarket industry: their products are sold by BMW dealerships as factory-endorsed performance accessories and carry a warranty that is honored by the BMW dealer network. No other BMW tuning brand holds this relationship with BMW's own dealer network, which speaks to the engineering quality and compatibility standards Dinan maintains.\u003c\/p\u003e\u003cp\u003eDinan engineers every upgrade with a system-level view of how BMW's performance components interact — software calibrations that work correctly with the stock and modified hardware, intake and exhaust components that maintain proper emissions compliance, and suspension upgrades that work within the bounds of BMW's chassis geometry. The result is BMW performance upgrades that preserve the refinement, reliability, and integration that makes BMW vehicles exceptional to drive, while meaningfully expanding their performance envelope. For the BMW owner who wants more performance without compromising the qualities they bought the car for, Dinan is the definitive answer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDinan performance upgrade — BMW dealer-endorsed, 40+ years of BMW specialization\u003c\/li\u003e\n\u003cli\u003eBMW dealer network warranty coverage\u003c\/li\u003e\n\u003cli\u003eSystem-level engineering for full compatibility with BMW electronics and drivetrains\u003c\/li\u003e\n\u003cli\u003eMaintains BMW refinement while expanding performance\u003c\/li\u003e\n\u003cli\u003eSee title for specific upgrade type and vehicle fitment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42605028376822,"sku":"D401-0030","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d401-0030_2_1024x1024_5d2e9744-0bd2-4f80-a3cc-32143499ce07.jpg?v=1645540022"},{"product_id":"dinan-f85-x5m-f86-x6m-high-flow-carbon-intake-filter-replacement-set","title":"Dinan High Flow Carbon Intake Filter Replacement Set - BMW F85 X5M\/ F86 X6M","description":"\u003cp\u003eDinan High Flow Carbon Intake Filter Replacement Set - F85 X5M \/ F86 X6M from Dinan is a BMW-specific performance component engineered to the standards that have made Dinan the most trusted BMW tuning brand in North America for over four decades. Dinan occupies a unique position in the BMW performance aftermarket: their products are carried and installed by authorized BMW dealerships under a program that BMW officially endorses, giving Dinan upgrades a level of factory validation that no other aftermarket BMW brand can claim. This relationship exists because Dinan demonstrates the engineering depth, compatibility standards, and quality consistency that BMW requires from any company associated with their dealer network.\u003c\/p\u003e\u003cp\u003eDinan's engineering process for each upgrade ensures that BMW's sophisticated electronics, engine management systems, and safety programs continue to function correctly with the upgraded component in place. Whether the upgrade is software-based, mechanical, or a combination of both, Dinan validates that all systems behave as the driver expects — the stability control calibrates correctly to the increased performance, the transmission adapts to the modified engine output, and emissions compliance is maintained where applicable. The result is more performance from your BMW with the same level of refinement, reliability, and ownership experience that BMW delivers from the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDinan BMW performance upgrade — BMW dealer network endorsed and warranted\u003c\/li\u003e\n\u003cli\u003e40+ years of BMW-exclusive tuning expertise\u003c\/li\u003e\n\u003cli\u003eFull system compatibility — electronics, engine management, and safety systems\u003c\/li\u003e\n\u003cli\u003eMaintains BMW refinement, reliability, and emissions compliance\u003c\/li\u003e\n\u003cli\u003eSee title for specific upgrade type and vehicle fitment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42605043319030,"sku":"D401-0023","price":133.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/F85-DIN-Fil-2_1024x1024_ce8a6b87-c39c-420b-abfb-6841c5070214.jpg?v=1722500249"},{"product_id":"dinan-f8x-m2-m3-m4-lightweight-tubular-adjustable-anti-roll-bar-set","title":"Dinan Lightweight Tubular Adjustable Anti-Roll Bar Set - BMW F87 M2\/ F80 M3\/ F82\/ F83 M4","description":"\u003cdiv data-mce-fragment=\"1\" class=\"product-single__description rte\" itemprop=\"description\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"product_desc_title\"\u003eAlmost all street cars come from the manufacturer with an anti-roll bar as it is a common part of modern suspension systems. However, they are designed to be overly soft for maximum comfort. An anti-roll bar does exactly what it says by reducing body roll in all situations. Every Dinan tuned anti-roll bar is built and tuned specifically for each BMW chassis. Lowering the amount of body roll keeps your BMW more level than stock (while still allowing just enough body roll) to improve mechanical grip. This improvement gives the driver a much more planted and confident feeling in every corner.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"product_desc_para\"\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFront Anti-Roll Bar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003eAdd a 32mm Lightweight Tubular Adjustable Front Anti-Roll Bar to reduce body roll, improve grip and stability while saving weight at the same time. This anti-roll bar is adjustable from 57% to 103% stiffer than the stock bar. This 4 hole bar can be mounted in 7 different positions with supplied adjustable end links.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Less Body Roll\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e More Mechanical Grip\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e More Stable At Limit\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Large 32mm size (the stock bar is 24.7mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e 4 hole bar with 7 possible positions on the bar w\/ supplied adjustable end links. \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Tubular (Hollow) Construction\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003eIncludes: Lightweight Tubular Adjustable Front Anti-Roll Bar, Adjustable End Links, Urethane Bushings, Heavy Duty Brackets w\/ Grease Fittings.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRear Anti-Roll Bar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003eAdd a 24mm Lightweight Tubular Adjustable Rear Anti-Roll Bar to reduce body roll, improve grip and stability while saving weight at the same time. This anti-roll bar is adjustable from 0% to 13% stiffer than the stock bar. This 3 hole bar can be mounted in 3 different positions with stock BMW end links.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Less Body Roll\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e More Mechanical Grip\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e More Stable At Limit\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Large 24mm size (the stock bar is 22.9mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e 3 hole bar with 3 possible positions on the bar\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Only tubular anti-roll bar with a large range of adjustment on the market\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Tubular (Hollow) Construction\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003eIncludes: Lightweight Tubular Adjustable Rear Anti-Roll Bar, Urethane Bushings, Heavy Duty Brackets w\/ Grease Fittings. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e**Please allow an additional 4-5 business days for this item to ship from IND\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"product-inquiry product-content-tab\"\u003e\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42605052068086,"sku":"D120-0605","price":973.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/1452169785_1024x1024_f85bd767-1c94-42ef-a8aa-a3a86a5f4dd7.jpg?v=1645540786"},{"product_id":"dinan-f10-m5-f1x-m6-lightweight-tubular-adjustable-anti-roll-bar-set","title":"Dinan Lightweight Tubular Adjustable Anti-Roll Bar Set - BMW F10 M5\/ F06\/ F12\/ F13 M6","description":"\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003eAlmost all street cars come from the manufacturer with an anti-roll bar as it is a common part of modern suspension systems. However, they are designed to be overly soft for maximum comfort. An anti-roll bar does exactly what it says by reducing body roll in all situations. Every Dinan tuned anti-roll bar is built and tuned specifically for each BMW chassis. Lowering the amount of body roll keeps your BMW more level than stock (while still allowing just enough body roll) to improve mechanical grip. This improvement gives the driver a much more planted and confident feeling in every corner. This Lightweight Tubular Adjustable Front Anti-Roll Bar may be added to the Stage 1 Suspension System for those who wish to build their high-performance suspension in phases.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFront Anti-Roll Bar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003eAdd a 28mm Lightweight Tubular Adjustable Front Anti-Roll Bar to reduce body roll, improve grip and stability while saving weight at the same time.  The Lightweight Tubular Adjustable Front Anti-Roll Bar is 44% lighter than a solid anti-roll bar of comparable stiffness. This anti-roll bar is adjustable from 35% to 53% stiffer than the stock bar. This 2 hole bar can be mounted in 3 different positions with supplied end links that are left and right hand threaded for easy length adjustment.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Less Body Roll\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e More Mechanical Grip\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e More Stable At Limit\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Large 28mm size (the stock bar is 24.5mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e 2 hole bar with 3 possible positions on bar \u0026amp; adjustable length end links\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Lightweight – 44% lighter than a solid anti-roll bar of comparable stiffness\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Only tubular anti-roll bar with a large range of adjustment on the market\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Tubular (Hollow) Construction\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003eIncludes: Lightweight Tubular Adjustable Front Anti-Roll Bar, Urethane Bushings, Heavy Duty Brackets, Adjustable Length End Links.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRear Anti-Roll Bar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003eAdd a 22mm Lightweight Tubular Adjustable Rear Anti-Roll Bar to reduce body roll, improve grip and stability while saving weight at the same time.  The Lightweight Tubular Adjustable Rear Anti-Roll Bar is 29% lighter than a solid anti-roll bar of comparable stiffness. This anti-roll bar is adjustable from 39% to 72% stiffer than the stock bar. This 3 hole bar can be mounted in 3 different positions with stock BMW end links.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Less Body Roll\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e More Mechanical Grip\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e More Stable At Limit\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Large 22mm size (the stock bar is 21.5mm)\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e 3 hole bar with 3 possible positions on the bar\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Lightweight – 29% lighter than a solid anti-roll bar of comparable stiffness\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Only tubular anti-roll bar with a large range of adjustment on the market\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e+\u003c\/strong\u003e Tubular (Hollow) Construction\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-open-accessibility-text-original=\"16px\"\u003eIncludes: Lightweight Tubular Adjustable Front Anti-Roll Bar, Urethane Bushings, Heavy Duty Brackets\u003cbr\u003e\u003cbr\u003eFits: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF10 M5\u003c\/li\u003e\n\u003cli\u003eF06 \/ F12 \/ F13 M6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42605073531126,"sku":"D120-0560","price":1027.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d120-0560_1024x1024_f2b0e8d3-6e8f-4baf-8789-21879d6f1efd.jpg?v=1645541178"},{"product_id":"dinan-f90-m5-f9x-m8-carbon-turbo-inlet-pipe-set","title":"Dinan Carbon Turbo Inlet Pipe Set - BMW F90 M5\/ F9X M8","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Dinan Turbo Inlets are an easy-to-install bolt-on upgrade that eliminates the largest obstacle in the entire factory intake system, the turbocharger inlets themselves. They are an upgrade that is both cost effective and an important stepping stone in the modification journey to unlocking maximum power out of the luxury sedan.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFrom the factory, the plastic inlets are limited and allow very little volume to pass as they neck down dramatically to the turbochargers themselves. This reduction stifles flow and increases the pressure ratio pre-turbine causing the turbochargers to work harder than necessary. This is a problem Dinan engineers took great care in rectifying through exhaustive prototyping and testing to ensure maximum future power potential while also having compatibility with numerous potential configurations. The benefit of their hard work are Dinan Turbo Inlets that are constructed of gloss UV coated 2x2 carbon fiber and are designed to mate seamlessly with whatever level of modification to the intake system you anticipate (paired with either stock air boxes or the full Dinan Cold Air Intake System). Where the carbon fiber ends an aluminum adapter to connect to the stock turbocharger begins. Using the same factory locking system, installation in this area is straightforward and earmarked by a \"click\" when secure. The simplicity making this quite possibly the quickest and least aggravating installs on the platform you will encounter. The pipe itself has been created to offer the largest possible cross-sectional area all the way from the intake filter to the turbo, a staggering 200% increase in volume over stock. This is the key to maximum performance gains from the system and the reason for the organic and unorthodox shape of the Dinan inlet system. While the effects of the additional volume are pronounced on a vehicle equipped with the factory airboxes and results in average gains of +11 WHP \/ +13 WTQ from 2000 RPM to redline, the overall efficiency of the entire intake system is maximized when paired with the Dinan Cold Air Intake that is also delivering an increased volume of cooler air earlier in the intake tract.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRobust testing with a fully instrumented engine further illustrated the multitude of benefits the Dinan Turbo Inlets offer beyond the confines of the dyno room and flow bench. Simply put, the F90 M5 \/ F9x M8 Dinan Turbo Inlets assist in allowing the turbocharger to operate at a lower pressure ratio, which means it will operate more efficiently. This directly translates to lower pre-turbine backpressure, lower turbocharger shaft speeds, lower turbocharger compressor discharge temperatures, and for the ability to achieve higher boost pressure levels.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMore Power: Max gains of 22 WHP and 18 lb-ft of torque @ 6500 RPM on an otherwise stock vehicle. Average gains of 11 WHP and 13 WTQ from 2000 RPM to redline.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutflows the factory inlets.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLarger internal diameter throughout (maximum cross-sectional area allowed).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMore volume (~200% more than stock; 105 cubic inches vs. 35 cubic inches per side).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCarbon fiber construction for heat insulation and visual appeal.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with both the OEM and Dinan intake systems.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatibility with other intakes not guaranteed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eQuick and easy bolt-on installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":45187252060406,"sku":"D760-0053","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/d760-0053_1_1024x1024_f0d111bd-c063-4c9f-b1a2-1f34254eaa66.jpg?v=1688031008"},{"product_id":"dinan-performance-spring-set-bmw-e39-m5","title":"Dinan Performance Spring Set - BMW E39 M5","description":"\u003cp\u003eThe E39 M5's S62 V8 is one of the great naturally aspirated BMW engines, but factory suspension geometry leaves measurable grip on the table. Dinan's Performance Spring Set for the E39 M5 corrects this by dropping the chassis 1\/4\" front and rear, tightening geometry and eliminating the excess body motion that blunts the S62's performance potential.\u003c\/p\u003e\u003cp\u003eEach spring is CNC wound from high-tensile chrome silicon wire and shot-peened for stress relief, holding rate through the life of the car without sagging. The increased spring rate directly reduces rear squat under acceleration and front dive under braking, delivering a composed, connected feel that matches what the S62 can actually do.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan E39 M5 Performance Spring Set Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Lowers the vehicle 1\/4\" front and rear for improved suspension geometry\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC wound high-tensile chrome silicon wire, shot-peened for stress relief\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Increased spring rates reduce body roll, dive, and squat\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Preset to prevent spring sag over the life of the car\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Substantial reduction in body roll for sharper, more responsive steering\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268683170038,"sku":"DNND100-0479","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/0303633e96871bc023508e26cd27b6a7L.jpg?v=1784708688"},{"product_id":"dinan-performance-spring-set-bmw-e90-m3","title":"Dinan Performance Spring Set - BMW E90 M3","description":"\u003cp\u003eThe E90 M3 and its high-revving S65 V8 reward precise chassis tuning more than almost any BMW produced. Dinan's Performance Spring Set drops the E90 M3 1\/2\" front and rear, sharpening geometry and eliminating the body roll that works against the S65's character. The springs are engineered for compatibility with both conventional and factory electronic shocks, so owners with EDC or standard dampers get the same result.\u003c\/p\u003e\u003cp\u003eBuilt from CNC-wound high-tensile chrome silicon wire and shot-peened for stress relief, these springs hold rate through aggressive use without sagging. The increased rate directly reduces rear squat under acceleration and front dive under braking, giving the E90 M3 the planted, connected feel it deserves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan E90 M3 Performance Spring Set Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Lowers the vehicle 1\/2\" front and rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Compatible with both conventional and factory electronic shocks (EDC)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC wound high-tensile chrome silicon wire, shot-peened for stress relief\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Increased spring rates reduce body roll, dive, and squat\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Preset to prevent spring sag\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Substantial reduction in body roll for sharper turn-in and steering response\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268683759862,"sku":"DNND100-0919","price":415.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/ee8dd1bf9160924057f297277aed7b53L.jpg?v=1784708838"},{"product_id":"dinan-performance-spring-set-bmw-g20-g22-330i-m340i-m440i","title":"Dinan Performance Spring Set - BMW G20 \/ G22 330i \/ M340i \/ M440i xDrive","description":"\u003cp\u003eBMW's G20 and G22 platforms share a capable suspension architecture, but spring calibration varies significantly between the 330i, M340i, and M440i xDrive variants. Dinan's Performance Spring Set is engineered separately for each configuration, targeting the optimal lowering and stiffness increase per chassis rather than applying a single generic tune across all variants. Springs work with both conventional and factory electronic shocks.\u003c\/p\u003e\u003cp\u003eAll springs are CNC wound from high-tensile chrome silicon wire, shot-peened for stress relief, and preset to eliminate sag. The increased rates reduce rear squat under acceleration and front dive under braking, scaled appropriately to each variant's stock spring baseline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan G20\/G22 Performance Spring Set Specs by Variant:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e \u003cstrong\u003e330i RWD:\u003c\/strong\u003e 7-95% stiffer front, 34-92% stiffer rear — lowered 1-1\/8\" front, 3\/4\" rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e \u003cstrong\u003e330i xDrive:\u003c\/strong\u003e 7-95% stiffer front, 34-92% stiffer rear — lowered 5\/8\" front, 3\/4\" rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e \u003cstrong\u003eM340i RWD:\u003c\/strong\u003e 15% stiffer front and rear — lowered 1\" front and rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e \u003cstrong\u003eM340i xDrive:\u003c\/strong\u003e Negligible front change, 10% stiffer rear — lowered 1\" front and rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e \u003cstrong\u003eM440i xDrive:\u003c\/strong\u003e Negligible front change, 23% stiffer rear — lowered 1-1\/8\" front, 5\/8\" rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC wound high-tensile chrome silicon wire, shot-peened for stress relief\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Preset to prevent spring sag\u003c\/p\u003e\u003cp\u003ePair with the Dinan Ride Quality \u0026amp; Handling Kit to maintain suspension travel and maximize comfort at the lowered ride height.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268684447990,"sku":"DNND100-0934","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/61f758e87bab1a1ccf70151e3ea6ec4bL.jpg?v=1784709285"},{"product_id":"dinan-performance-spring-set-bmw-f95-f96-x5m-x6m","title":"Dinan Performance Spring Set - BMW F95 X5 M \/ F96 X6 M","description":"\u003cp\u003eThe F95 X5 M and F96 X6 M carry serious performance hardware from the factory, but their tall SUV ride height undermines the S63M's capabilities with avoidable body roll and sluggish geometry. Dinan's Performance Spring Set drops both trucks 1-3\/8\" (35mm) front and rear — a significant correction that brings the suspension geometry into the range where the S63M can do its best work.\u003c\/p\u003e\u003cp\u003eEach dual-rate spring is CNC wound from high-tensile chrome silicon wire, shot-peened for stress relief, and preset to eliminate sag. The 20% increase in spring stiffness front and rear directly attacks body roll under hard cornering, reducing squat under acceleration and dive under braking for a much more composed dynamic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan F95 X5 M \/ F96 X6 M Performance Spring Set Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Lowers the vehicle 1-3\/8\" (35mm) front and rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 20% increase in spring stiffness front and rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Dual-rate spring design front and rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC wound high-tensile chrome silicon wire, shot-peened for stress relief\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Preset to prevent spring sag\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Substantial reduction in body roll and improved cornering composure\u003c\/p\u003e\u003cp\u003eRide Quality \u0026amp; Handling Kit sold separately — highly recommended to maximize suspension travel at the lowered ride height.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268684480758,"sku":"DNND100-0936","price":349.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/0808760a4ff46227249357b92ae2f087L.jpg?v=1784135394"},{"product_id":"dinan-performance-spring-set-bmw-g42-m240i-xdrive","title":"Dinan Performance Spring Set - BMW G42 M240i xDrive","description":"\u003cp\u003eThe G42 M240i xDrive is one of the most capable sport coupes in BMW's current lineup, and Dinan's Performance Spring Set takes its chassis tune further with a 7\/8\" (22mm) drop and a 24% increase in spring stiffness across both axles. The front springs use a dual-rate design; the rear runs linear rate — a deliberate pairing that delivers progressive feel up front with predictable breakaway at the rear.\u003c\/p\u003e\u003cp\u003eSprings are CNC wound from high-tensile chrome silicon wire and shot-peened for stress relief. The kit is engineered for compatibility with the factory Adaptive M Suspension electronic shocks, so you keep the factory damper adjustment range while running a significantly sharper spring tune.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan G42 M240i xDrive Performance Spring Set Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Lowers the vehicle 7\/8\" (22mm) front and rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 24% increase in spring stiffness front and rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Front dual-rate springs, rear linear-rate springs\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Compatible with factory Adaptive M Suspension electronic shocks\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC wound high-tensile chrome silicon wire, shot-peened for stress relief\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Preset to prevent spring sag\u003c\/p\u003e\u003cp\u003ePair with the Dinan Ride Quality \u0026amp; Handling Kit for optimized suspension travel and ride comfort at the lowered height.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268684611830,"sku":"DNND100-0939","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/dbb4f8624b4001708e14fedaeeb3cd0fL.jpg?v=1784135396"},{"product_id":"dinan-performance-spring-set-bmw-g01-g02-x3-x4-m40i","title":"Dinan Performance Spring Set - BMW G01 X3 M40i \/ G02 X4 M40i","description":"\u003cp\u003eThe G01 X3 M40i and G02 X4 M40i are the performance variants of BMW's sport-utility twins, and they respond well to targeted suspension calibration. Dinan's Performance Spring Set drops both 7\/8\" (22mm) front and rear with a 25% increase in spring stiffness, tightening geometry and cutting the body roll that works against these platforms at pace.\u003c\/p\u003e\u003cp\u003eThe spring design is differentiated front-to-rear: linear-rate fronts for consistent, precise feel at turn-in; dual-rate rears to handle the varying load demands of an xDrive SUV. All springs are CNC wound from high-tensile chrome silicon wire, shot-peened for stress relief, and preset to hold rate without sagging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan G01\/G02 X3\/X4 M40i Performance Spring Set Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Lowers the vehicle 7\/8\" (22mm) front and rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 25% increase in spring stiffness front and rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Front linear-rate springs, rear dual-rate springs\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC wound high-tensile chrome silicon wire, shot-peened for stress relief\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Preset to prevent spring sag\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Substantial reduction in body roll\u003c\/p\u003e\u003cp\u003ePair with the Dinan Ride Quality \u0026amp; Handling Kit to maintain suspension travel at the lowered ride height.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268684677366,"sku":"DNND100-0942","price":349.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/7c0f0869fe1e48eab840cc272a8403c9L.jpg?v=1784135397"},{"product_id":"dinan-adjustable-sway-bar-set-28mm-19mm-bmw-g22-430i-m440i","title":"Dinan Adjustable Sway Bar Set 28mm \u0026 19mm - BMW G22 \/ G23 \/ G26 430i \/ M440i","description":"\u003cp\u003eFactory anti-roll bars on the BMW G22 and G23\/G26 platform are sized for ride comfort, not cornering authority. Dinan replaces both with hollow high-tensile alloy steel bars tuned specifically for the G-platform's weight distribution: a 28mm front bar (vs. stock 26.1mm) and a 19mm rear bar (vs. stock 17.8mm). The result is 50% more front stiffness and 54-66% more rear stiffness — enough to meaningfully reduce body roll without introducing the instability that comes from oversized bars.\u003c\/p\u003e\u003cp\u003eThe rear bar is 2-position adjustable, letting you fine-tune the understeer\/oversteer balance for track days, canyon runs, or daily driving. Tubular hollow construction keeps the weight addition minimal while delivering a step-change in cornering capability. Polyurethane bushings and grease are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan G22\/G23\/G26 Adjustable Sway Bar Set Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Front bar: 28mm (vs. stock 26.1mm) — 50% stiffer\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Rear bar: 19mm (vs. stock 17.8mm) — 54-66% stiffer\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Rear bar is 2-position adjustable for tunable cornering balance\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Hollow tubular construction — maximum stiffness with minimal weight penalty\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e High-tensile strength alloy steel construction\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Polyurethane bushings and grease included\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Fits BMW G22 430i\/M440i, G23\/G26 430i\/M440i, G20 330i\/M340i, G42 M240i\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268685398262,"sku":"DNND120-0630","price":467.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/1b0ed86502e56f23cb91813f1c8a2cf0L.jpg?v=1784135404"},{"product_id":"dinan-camber-plate-kit-front-bmw-e9x-m3","title":"Dinan Camber Plate Kit - BMW E9X M3","description":"\u003cp\u003eStock E9X M3 alignment allows negative camber adjustment, but the factory range isn't aggressive enough for drivers who push the S65 hard on track. Dinan's Camber Plate Kit shifts the entire adjustment range by -0.7 degrees, opening up more negative camber than the stock adjuster can achieve on its own. That additional negative camber plants the outer front tire through corners, improving mechanical grip and sharpening turn-in without requiring a spring change or major geometry work.\u003c\/p\u003e\u003cp\u003eThe kit bolts directly to stock mounting locations. Aggressive drivers also benefit from reduced outside edge tire wear as a practical consequence of the more negative camber setting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan E9X M3 Camber Plate Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Shifts the entire stock adjustment range by -0.7 degrees toward more negative camber\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Dramatically improves mechanical grip during cornering\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Reduces understeer for sharper, more confident turn-in\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Reduces outside edge tire wear under aggressive camber settings\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Bolts to stock mounting locations — no modification required\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268685725942,"sku":"DNND160-0003","price":212.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/1d5868c35b8eeb055524436d379d037aL.jpg?v=1784135408"},{"product_id":"dinan-carbon-fiber-strut-tower-brace-front-bmw-e9x-m3","title":"Dinan Carbon Fiber Strut Tower Brace - BMW E9X M3","description":"\u003cp\u003eThe E9X M3's S65-powered chassis is stiff by sports car standards, but open strut towers still allow measurable flex under hard cornering that blunts steering response and front grip consistency. Dinan's Carbon Fiber Strut Tower Brace ties the strut towers together using aerospace-quality carbon fiber rods with black powdercoated forged aluminum ends, bolting directly to stock mounts without modification.\u003c\/p\u003e\u003cp\u003eThe carbon fiber weave matches Dinan's High Flow Carbon Fiber Intake in color and pattern, making it a genuine visual upgrade to the engine bay as well as a structural one. Works with Dinan suspension systems or stock dampers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan E9X M3 Carbon Fiber Strut Tower Brace Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Reduces chassis flex under hard cornering for sharper, more consistent steering response\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Aerospace-quality carbon fiber rods with black powdercoated forged aluminum ends\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Carbon fiber weave matched to Dinan High Flow Carbon Intake in color and pattern\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Bolts to stock mounting locations — no modification required\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Compatible with Dinan suspension systems and stock components\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268686020854,"sku":"DNND180-0011","price":531.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/f297e962a18be1322db21595ff331b7bL.jpg?v=1784135412"},{"product_id":"dinan-aluminum-strut-tower-brace-front-bmw-g20-g42-230i-330i-m240i-m340i","title":"Dinan Aluminum Strut Tower Brace - BMW G20 \/ G42 230i \/ 330i \/ M240i \/ M340i","description":"\u003cp\u003eBMW's factory strut towers on the G20 and G42 use smashed aluminum tubes that are an eyesore and a missed structural opportunity. Dinan replaces them with solid black-anodized billet aluminum braces that look purposeful and actually work — reducing chassis flex under hard cornering to sharpen steering response and improve front grip consistency.\u003c\/p\u003e\u003cp\u003eThe brace is compatible with both stock intake systems and Dinan Intake Systems equipped with the brace valley (D760-0058 \/ D760-0059). Bolt-on installation, no modification required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan G20\/G42 Aluminum Strut Tower Brace Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Solid black-anodized billet aluminum — maximum strength and visual appeal\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Reduces chassis flex during cornering for improved steering response\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Improved chassis rigidity without significant weight penalty\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Compatible with stock and Dinan Intake Systems (D760-0058 \/ D760-0059 with brace valley)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Fits BMW G20 230i\/330i\/M240i\/M340i, G42 230i\/M240i\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Bolt-on installation — no modification required\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268686184694,"sku":"DNND180-0014","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/2bf13ff3ed311980118991c59264ed48L.jpg?v=1784135414"},{"product_id":"dinan-gloss-carbon-fiber-strut-tower-brace-front-bmw-g8x-m2-m3-m4","title":"Dinan Gloss Carbon Fiber Strut Tower Brace - BMW G87 M2 \/ G80 M3 \/ G82 M4","description":"\u003cp\u003eBMW's G87 M2, G80 M3, and G82 M4 use a 2-piece OEM strut bar setup that Dinan's Carbon Fiber Strut Tower Brace replaces with a unified structural system. The brace connects both strut towers with 2x2 twill carbon fiber and inset aluminum mounting points, eliminating flex under hard cornering for sharper, more consistent front grip. At 2.8 lbs vs. the OEM steel setup at 8.4 lbs, it's 5.6 lbs lighter — a meaningful reduction on a chassis that rewards every kilogram saved.\u003c\/p\u003e\u003cp\u003eDesigned to pair visually with the Dinan cold air intake for a cohesive engine bay in matching carbon fiber. Bolt-on installation using factory mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan G8X M2\/M3\/M4 Gloss Carbon Fiber Strut Tower Brace Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e 5.6 lbs lighter than OEM steel bars (2.8 lbs vs. 8.4 lbs)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 2x2 twill gloss carbon fiber with inset aluminum mounting points\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Unified one-piece design replaces OEM 2-piece strut bar setup\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Reduces chassis flex for sharper, more consistent front steering response\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Gloss finish pairs with Dinan cold air intake for unified engine bay appearance\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Bolt-on installation using factory mounting hardware — no modification required\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Fits BMW G87 M2, G80 M3, G82\/G83 M4 (all variants)\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268686250230,"sku":"DNND180-0015","price":1171.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/107e3c8e2ade7e6f8a807498ddb7668dL.jpg?v=1784135415"},{"product_id":"dinan-matte-carbon-fiber-strut-tower-brace-front-bmw-g8x-m2-m3-m4","title":"Dinan Matte Carbon Fiber Strut Tower Brace - BMW G87 M2 \/ G80 M3 \/ G82 M4","description":"\u003cp\u003eBMW's G87 M2, G80 M3, and G82 M4 use a 2-piece OEM strut bar setup that Dinan's Carbon Fiber Strut Tower Brace replaces with a unified structural system. The brace connects both strut towers with 2x2 twill carbon fiber and inset aluminum mounting points, eliminating flex under hard cornering for sharper, more consistent front grip. At 2.8 lbs vs. the OEM steel setup at 8.4 lbs, it's 5.6 lbs lighter — a meaningful reduction on a chassis that rewards every kilogram saved.\u003c\/p\u003e\u003cp\u003eThe matte finish delivers a subtle, track-inspired look that pairs cleanly with the Dinan cold air intake without competing for visual attention. Bolt-on installation using factory mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan G8X M2\/M3\/M4 Matte Carbon Fiber Strut Tower Brace Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e 5.6 lbs lighter than OEM steel bars (2.8 lbs vs. 8.4 lbs)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 2x2 twill matte carbon fiber with inset aluminum mounting points\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Unified one-piece design replaces OEM 2-piece strut bar setup\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Reduces chassis flex for sharper, more consistent front steering response\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Matte finish — understated, track-inspired look in the engine bay\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Bolt-on installation using factory mounting hardware — no modification required\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Fits BMW G87 M2, G80 M3, G82\/G83 M4 (all variants)\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268686315766,"sku":"DNND180-0015-B","price":1171.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/02bd386c67dcdd694f8daf1315733118L.jpg?v=1784135416"},{"product_id":"dinan-adjustable-coilover-suspension-system-bmw-f90-m5","title":"Dinan Adjustable Coilover Suspension System - BMW F90 M5","description":"\u003cp\u003eBred in the race lab but refined for the street, the Dinan Adjustable Coilover System for the BMW F90 M5 retains the factory electronic shocks while replacing the springs with a more aggressive, performance-optimized formula. Dinan also converts the rear from the stock progressive-rate springs to a more predictable linear-rate design, reducing body roll without compromising compliance. The system allows up to 2\" of drop in front and 2-1\/8\" in the rear, though Dinan recommends 1\" front and 1-1\/8\" rear to maintain the civilized ride quality the M5 is built for.\u003c\/p\u003e\u003cp\u003eThreaded collars allow precise ride height adjustment front and rear. Suspension packers are included to fine-tune bump stop clearance for your preferred balance of handling and comfort. Components are machined from 6061-T6 aluminum and black anodized.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan F90 M5 Adjustable Coilover System Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Retains factory electronic shocks — Dinan replaces springs only\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Spring rates 20% stiffer front, 15% stiffer rear\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Rear converted from progressive to linear rate for improved predictability\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Up to 2\" drop front, 2-1\/8\" rear (Dinan recommended: 1\" front, 1-1\/8\" rear)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Threaded collars for precise front and rear ride height adjustment\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Progressive bump stops and suspension packers included\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Helper springs maintain proper operation under droop conditions\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Components machined from 6061-T6 aluminum, black anodized\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Stock upper spring mounts retained for quiet operation\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Substantial reduction in body roll\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268686872822,"sku":"DNND190-0901","price":1599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/fb537dac4b094f9e776b6d40644be0d3L.jpg?v=1784135423"},{"product_id":"dinan-adjustable-coilover-suspension-system-bmw-g80-m3-g82-m4","title":"Dinan Adjustable Coilover Suspension System - BMW G80 M3 \/ G82 M4","description":"\u003cp\u003eThe Dinan Adjustable Coilover System for the BMW G80 M3 and G82 M4 takes a platform-specific engineering approach. The G8X platform is known for its tendency toward oversteer — stiffening the rear springs would exacerbate that. Instead, Dinan runs the front springs 15% stiffer to cut body roll, while making the rear springs 10% softer and converting them from progressive to dual-rate. The softer, more compliant rear increases rear grip and composure at the limit, giving you a more neutral, predictable car rather than a sharper but looser one.\u003c\/p\u003e\u003cp\u003eThe system supports up to 1-1\/8\" of drop in front and 2-1\/4\" in the rear, with Dinan recommending 3\/4\" (M4) to 7\/8\" (M3) front and 3\/4\" rear for best ride quality. You can also raise above stock height — up to 1\/2\" front and 1-1\/4\" rear. Factory electronic shocks are retained throughout. Threaded collars allow easy ride height adjustment, and suspension packers dial in bump-stop clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan G80 M3 \/ G82 M4 Adjustable Coilover System Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Retains factory electronic shocks — Dinan replaces springs only\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Front springs 15% stiffer — reduces body roll\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Rear springs 10% softer, converted to dual-rate — improves rear grip and compliance\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Up to 1-1\/8\" lower front, 2-1\/4\" lower rear (recommended: 3\/4\"-7\/8\" front, 3\/4\" rear)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Can also run above stock: up to 1\/2\" front, 1-1\/4\" rear above stock height\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Threaded collars for precise front and rear ride height adjustment\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Progressive bump stops and suspension packers included\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Stock upper spring mounts and spring isolators retained for quiet operation\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Components machined from 6061-T6 aluminum, black anodized\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268686938358,"sku":"DNND190-8210","price":1171.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/a27f35f86629753650a9a8773acbc3bdL.jpg?v=1784135424"},{"product_id":"dinan-ride-quality-handling-kit-bmw-g20-330i-m340i-g22-m440i","title":"Dinan Ride Quality \u0026 Handling Kit - BMW G20 330i \/ M340i \/ G22 M440i xDrive","description":"\u003cp\u003eLowering a BMW with a spring set without addressing the bump stops creates a predictable problem: the shortened suspension travel causes stock bump stops to engage too early, leading to sudden bottoming out and degraded ride quality. Dinan's Ride Quality \u0026amp; Handling Kit solves this with progressive-rate bump stops tuned specifically for Dinan springs on the BMW G20 330i, M340i, and G22 M440i xDrive platforms.\u003c\/p\u003e\u003cp\u003eBy maximizing available suspension travel at the lowered ride height, the kit eliminates the abrupt bottoming out that compromises both comfort and handling. The progressive bump stops also add a rate effect through corners that improves mechanical grip — a genuine performance benefit alongside the comfort improvement. Set of 4 bump stops. Required companion to get full performance and ride quality from Dinan spring sets on this platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan G20\/G22 Ride Quality \u0026amp; Handling Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Progressive-rate bump stops tuned for use with Dinan spring sets\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Maximizes suspension travel at lowered ride height\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Eliminates sudden bottoming out — the most common side effect of lowering without bump stop tuning\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Adds progressive bump-rate effect for improved mechanical grip through corners\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e OE-quality material for consistent, predictable characteristics\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 4 bump stops included\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Also fits BMW G01 X3 M40i, G02 X4 M40i, F95 X5 M, F96 X6 M\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268687200502,"sku":"DNND193-0121","price":158.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/94fc19d71b73d5749bd8b8d69e7424b6L.jpg?v=1784135427"},{"product_id":"dinan-ride-quality-handling-kit-bmw-f97-x3m-f98-x4m","title":"Dinan Ride Quality \u0026 Handling Kit - BMW F97 X3 M \/ F98 X4 M","description":"\u003cp\u003eLowering a BMW F97 X3 M or F98 X4 M with a spring set without addressing the bump stops creates a predictable problem: shortened suspension travel causes stock bump stops to engage too early, leading to sudden bottoming out. Dinan's Ride Quality \u0026amp; Handling Kit solves this with progressive-rate bump stops tuned specifically for Dinan springs on the F97 X3 M and F98 X4 M platforms.\u003c\/p\u003e\u003cp\u003eBy maximizing available suspension travel at the lowered ride height, the kit eliminates abrupt bottoming out while also adding a bump-rate effect through corners that improves mechanical grip. Required companion piece to get full performance and ride quality from Dinan spring sets on this platform. Set of 4 bump stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan F97 X3M \/ F98 X4M Ride Quality \u0026amp; Handling Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Progressive-rate bump stops tuned for use with Dinan spring sets\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Maximizes suspension travel at lowered ride height\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Eliminates sudden bottoming out — the most common side effect of lowering without bump stop tuning\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Adds progressive bump-rate effect for improved mechanical grip through corners\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e OE-quality material for consistent, predictable characteristics\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 4 bump stops included\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Fits BMW F97 X3 M, F97 X3 M Competition, F98 X4 M, F98 X4 M Competition\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268688707830,"sku":"DNND193-9701","price":158.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/e93241a4ec93997fc3ba62dbafea1fb5L.jpg?v=1784135442"},{"product_id":"dinan-wheel-spacers-5x112-66-5mm-cb-5mm-thick-set-of-2","title":"Dinan Wheel Spacer 5mm - BMW 5x112 66.5mm CB","description":"\u003cp\u003eDinan's 5mm Wheel Spacers are CNC-machined from aluminum and anodized black to push BMW G-chassis wheels out 5mm from the hub per side — widening the track for a more aggressive stance and improved cornering stability. The 5x112 bolt pattern and 66.5mm center bore fit a broad range of G-chassis BMW models.\u003c\/p\u003e\u003cp\u003eLonger lug bolts are required when installing wheel spacers. Appropriate bolt lengths for this spacer are listed in the product's \"We Suggest\" section and sold separately. Verify the correct thread size for your specific application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan Wheel Spacer 5mm Features (5x112 66.5mm CB):\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e 5mm thick — widens track 5mm per side\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC-machined aluminum, anodized black finish\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 5x112 bolt pattern, 66.5mm center bore (BMW G-chassis)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Weight-saving lightweight design\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 2\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Longer lug bolts required — sold separately\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268688969974,"sku":"DNND210-2023","price":58.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/ec52146c87ba16f429ac687410a31f91L.jpg?v=1784135445"},{"product_id":"dinan-wheel-spacers-5x112-66-5mm-cb-10mm-thick-set-of-2","title":"Dinan Wheel Spacer 10mm - BMW 5x112 66.5mm CB","description":"\u003cp\u003eDinan's 10mm Wheel Spacers are CNC-machined from aluminum and anodized black to push BMW G-chassis wheels out 10mm from the hub per side — widening the track for a more aggressive stance and improved cornering stability. The 5x112 bolt pattern and 66.5mm center bore fit a broad range of G-chassis BMW models. Hub-centric rings are included to ensure perfect centering and eliminate any vibration at speed.\u003c\/p\u003e\u003cp\u003eLonger lug bolts are required when installing wheel spacers. Appropriate bolt lengths for this spacer are listed in the product's \"We Suggest\" section and sold separately. Verify the correct thread size for your specific application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan Wheel Spacer 10mm Features (5x112 66.5mm CB):\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e 10mm thick — widens track 10mm per side\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC-machined aluminum, anodized black finish\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Hub-centric rings included for vibration-free installation\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 5x112 bolt pattern, 66.5mm center bore (BMW G-chassis)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Weight-saving lightweight design\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 2\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Longer lug bolts required — sold separately\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268689232118,"sku":"DNND210-2027","price":85.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/f4e02804a6774f4d3420cdffe53c3f73L.jpg?v=1784135449"},{"product_id":"dinan-wheel-spacers-5x112-66-5mm-cb-15mm-thick-set-of-2","title":"Dinan Wheel Spacer 15mm - BMW 5x112 66.5mm CB","description":"\u003cp\u003eDinan's 15mm Wheel Spacers are CNC-machined from aluminum and anodized black to push BMW G-chassis wheels out 15mm from the hub per side — widening the track for a more aggressive stance and improved cornering stability. The 5x112 bolt pattern and 66.5mm center bore fit a broad range of G-chassis BMW models. Hub-centric rings are included to ensure perfect centering and eliminate any vibration at speed.\u003c\/p\u003e\u003cp\u003eLonger lug bolts are required when installing wheel spacers. Appropriate bolt lengths for this spacer are listed in the product's \"We Suggest\" section and sold separately. Verify the correct thread size for your specific application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan Wheel Spacer 15mm Features (5x112 66.5mm CB):\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e 15mm thick — widens track 15mm per side\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC-machined aluminum, anodized black finish\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Hub-centric rings included for vibration-free installation\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 5x112 bolt pattern, 66.5mm center bore (BMW G-chassis)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Weight-saving lightweight design\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 2\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Longer lug bolts required — sold separately\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268689297654,"sku":"DNND210-2029","price":95.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/1736a40f48e9ab50c94fe357210d52d8L.jpg?v=1784135449"},{"product_id":"dinan-wheel-spacers-5x112-66-5mm-cb-20mm-thick-set-of-2","title":"Dinan Wheel Spacer 20mm - BMW 5x112 66.5mm CB","description":"\u003cp\u003eDinan's 20mm Wheel Spacers are CNC-machined from aluminum and anodized black to push BMW G-chassis wheels out 20mm from the hub per side — widening the track for a more aggressive stance and improved cornering stability. The 5x112 bolt pattern and 66.5mm center bore fit a broad range of G-chassis BMW models. Hub-centric rings are included to ensure perfect centering and eliminate any vibration at speed.\u003c\/p\u003e\u003cp\u003eLonger lug bolts are required when installing wheel spacers. Appropriate bolt lengths for this spacer are listed in the product's \"We Suggest\" section and sold separately. Verify the correct thread size for your specific application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDinan Wheel Spacer 20mm Features (5x112 66.5mm CB):\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e 20mm thick — widens track 20mm per side\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC-machined aluminum, anodized black finish\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Hub-centric rings included for vibration-free installation\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 5x112 bolt pattern, 66.5mm center bore (BMW G-chassis)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Weight-saving lightweight design\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 2\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Longer lug bolts required — sold separately\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268689461494,"sku":"DNND210-2031","price":103.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/18577a5871cb89230eaf07e50d929aeaL.jpg?v=1784135451"},{"product_id":"dinan-wheel-spacers-5x120-72-6mm-cb-10mm-thick-set-of-2","title":"Dinan Wheel Spacer 10mm - BMW 5x120 72.6mm CB","description":"\u003cp\u003eFor BMW models running the 5x120 bolt pattern, Dinan's hub-centric wheel spacers provide the cleanest path to a wider stance without compromising wheel fitment integrity. CNC-machined from billet aluminum and finished in anodized black, each spacer is built to BMW's 72.6mm center bore spec so the hub pilots the wheel — not the lug bolts. At 10mm, this is the entry-level fitment correction: enough to flush out wheels that sit marginally inset without requiring extended lug bolts in most applications. Sold in pairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e 10mm thick, hub-centric design for BMW 5x120 \/ 72.6mm CB applications\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e CNC-machined billet aluminum, anodized black finish\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Weight-saving material spec compared to steel equivalent\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 2\u003c\/p\u003e\u003cp\u003eExtended lug bolts are required when running spacers. Dinan offers compatible M12x1.5 and M14x1.25 cone-seat lug bolts in multiple lengths — select the appropriate length based on your spacer thickness and chassis thread spec.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268689953014,"sku":"DNND210-2039","price":83.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/aaed565a529e7a7a1d4bb869cd3c6103L.jpg?v=1784135457"},{"product_id":"dinan-lug-bolts-cone-seat-m14x1-25-27mm-black-set-of-10","title":"Dinan Lug Bolt Cone Seat M14x1.25 27mm Black - BMW","description":"\u003cp\u003eMatching hardware matters when you're stacking tolerances at the wheel. Dinan's M14x1.25 lug bolts are machined to OEM cone-seat spec — the same 60-degree cone geometry BMW uses at the factory — in a black zinc-coated steel construction that resists corrosion without adding bulk. The 27mm length is the stock-position replacement for F and G chassis BMWs running no spacers, providing full thread engagement in the hub without bottoming out or protruding past the seat. Sold as a set of 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e M14x1.25 thread, OEM cone-seat geometry — F\/G chassis application\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 27mm shank length, for stock-position fitment (no spacers)\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Steel construction, black zinc corrosion-resistant coating\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 10\u003c\/p\u003e\u003cp\u003eThread sizing: E chassis BMWs typically use M12x1.5. F and G chassis models use M14x1.25. Verify your chassis before ordering. For spacer applications, select a longer bolt to compensate for added spacer thickness.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268690411766,"sku":"DNND220-0001","price":40.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/26e4957230e3facb8b7395925a8e09f4L.jpg?v=1784135462"},{"product_id":"dinan-lug-bolts-cone-seat-m14x1-25-30mm-black-set-of-10","title":"Dinan Lug Bolt Cone Seat M14x1.25 30mm Black - BMW","description":"\u003cp\u003eWhen running 2mm or 3mm wheel spacers on an F or G chassis BMW, the OEM-length lug bolt no longer provides adequate thread engagement — you need additional shank depth to restore the factory spec. Dinan's 30mm M14x1.25 lug bolt is the correct solution: OEM cone-seat geometry, black zinc-coated steel, and precisely the shank length needed to maintain full engagement through a 2–3mm spacer. Sold as a set of 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e M14x1.25 thread, OEM cone-seat geometry — F\/G chassis application\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 30mm shank length, for use with 2mm and 3mm spacers\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Steel construction, black zinc corrosion-resistant coating\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 10\u003c\/p\u003e\u003cp\u003eThread sizing: E chassis BMWs typically use M12x1.5. F and G chassis models use M14x1.25. Verify your spacer thickness and chassis thread spec before ordering.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268690444534,"sku":"DNND220-0002","price":40.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/26e4957230e3facb8b7395925a8e09f4L_09f7f411-7f1a-4e34-8c7c-1ec25e447943.jpg?v=1784135463"},{"product_id":"dinan-lug-bolts-cone-seat-m14x1-25-33mm-black-set-of-10","title":"Dinan Lug Bolt Cone Seat M14x1.25 33mm Black - BMW","description":"\u003cp\u003eThe 4–5mm spacer range is one of the most common fitments for closing the gap between wheel and arch on F and G chassis BMWs, and 33mm is the dedicated hardware match for those thicknesses. Dinan machines these bolts to OEM cone-seat spec in black zinc-coated steel — the same 60-degree cone geometry and M14x1.25 pitch as factory hardware — with the added shank length needed to restore proper hub thread engagement through a 4mm or 5mm spacer. Sold as a set of 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e M14x1.25 thread, OEM cone-seat geometry — F\/G chassis application\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 33mm shank length, for use with 4mm and 5mm spacers\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Steel construction, black zinc corrosion-resistant coating\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 10\u003c\/p\u003e\u003cp\u003eThread sizing: E chassis BMWs typically use M12x1.5. F and G chassis models use M14x1.25. Verify your spacer thickness and chassis thread spec before ordering.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268690510070,"sku":"DNND220-0003","price":40.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/26e4957230e3facb8b7395925a8e09f4L_e3f2c26a-e4fd-4b74-9db6-9c2858a4271b.jpg?v=1784135464"},{"product_id":"dinan-lug-bolts-cone-seat-m14x1-25-40mm-black-set-of-10","title":"Dinan Lug Bolt Cone Seat M14x1.25 40mm Black - BMW","description":"\u003cp\u003eRunning 10mm or 12mm spacers is serious fitment territory — and at those thicknesses, hardware integrity is non-negotiable. Dinan's 40mm M14x1.25 lug bolt provides the additional shank depth needed to restore full thread engagement through a 10mm or 12mm spacer on F and G chassis BMWs. OEM cone-seat geometry ensures the bolt loads the hub identically to factory spec, and the black zinc-coated steel construction handles road grime and moisture exposure over time. Sold as a set of 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e M14x1.25 thread, OEM cone-seat geometry — F\/G chassis application\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 40mm shank length, for use with 10mm and 12mm spacers\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Steel construction, black zinc corrosion-resistant coating\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 10\u003c\/p\u003e\u003cp\u003eThread sizing: E chassis BMWs typically use M12x1.5. F and G chassis models use M14x1.25. Verify your spacer thickness and chassis thread spec before ordering.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268690673910,"sku":"DNND220-0005","price":40.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/26e4957230e3facb8b7395925a8e09f4L_4eb025fe-21b0-4630-90c4-8c51ddf151a0.jpg?v=1784135465"},{"product_id":"dinan-lug-bolts-cone-seat-m14x1-25-45mm-black-set-of-10","title":"Dinan Lug Bolt Cone Seat M14x1.25 45mm Black - BMW","description":"\u003cp\u003eAt 15mm and 17mm, spacer thickness begins to meaningfully shift the wheel outboard — and the bolt length has to follow. Dinan's 45mm M14x1.25 lug bolt is engineered for exactly these thicknesses, providing the full thread engagement depth needed to secure the wheel properly through a double-digit spacer stack. OEM cone-seat geometry, black zinc-coated steel construction — same spec as the rest of the line, scaled for the task. Sold as a set of 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e M14x1.25 thread, OEM cone-seat geometry — F\/G chassis application\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 45mm shank length, for use with 15mm and 17mm spacers\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Steel construction, black zinc corrosion-resistant coating\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 10\u003c\/p\u003e\u003cp\u003eThread sizing: E chassis BMWs typically use M12x1.5. F and G chassis models use M14x1.25. Verify your spacer thickness and chassis thread spec before ordering.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268690739446,"sku":"DNND220-0006","price":40.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/26e4957230e3facb8b7395925a8e09f4L_15b40613-e5b3-41cc-8f87-29a3a865795d.jpg?v=1784135467"},{"product_id":"dinan-lug-bolts-cone-seat-m14x1-25-50mm-black-set-of-10","title":"Dinan Lug Bolt Cone Seat M14x1.25 50mm Black - BMW","description":"\u003cp\u003eTwenty millimeters is the maximum spacer thickness in Dinan's lineup, and the 50mm lug bolt is the dedicated match. This is the longest bolt in the range, sized to restore proper hub thread engagement when the spacer stack is at its most aggressive. OEM cone-seat geometry and black zinc-coated steel hold the spec consistent across every length in the line. Sold as a set of 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e M14x1.25 thread, OEM cone-seat geometry — F\/G chassis application\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e 50mm shank length, for use with 20mm spacers\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Steel construction, black zinc corrosion-resistant coating\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Set of 10\u003c\/p\u003e\u003cp\u003eThread sizing: E chassis BMWs typically use M12x1.5. F and G chassis models use M14x1.25. Verify your spacer thickness and chassis thread spec before ordering.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268690804982,"sku":"DNND220-0007","price":40.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/26e4957230e3facb8b7395925a8e09f4L_c286b719-8878-4f4f-92d0-d0b905635065.jpg?v=1784135467"},{"product_id":"dinan-tension-strut-ball-joint-kit-front-bmw-f90-m5","title":"Dinan Tension Strut Ball Joint Kit - BMW F90 M5","description":"\u003cp\u003eThe BMW F90 M5's front tension struts ship from the factory with rubber bushings — a concession to ride compliance that comes at the cost of front-end precision. Under hard braking, those mounts allow enough fore-aft deflection to generate brake shimmy; during cornering, the compliance dilutes the steering feedback the S63 powertrain deserves. Dinan's tension strut ball joint kit replaces the factory rubber with nylon-lined sealed bearings in machined aluminum housings — direct OEM fitment, no modifications required. The nylon liner retains enough compliance to keep NVH in check on the street while eliminating the deflection that costs you feedback and introduces shimmy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e+\u003c\/strong\u003e Nylon-lined sealed bearings replace factory rubber tension strut bushings\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Machined aluminum housings — direct OEM replacement fitment\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Eliminates front-end brake shimmy under hard deceleration\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e Improved steering responsiveness and chassis feedback\u003cbr\u003e\u003cstrong\u003e+\u003c\/strong\u003e BMW F90 M5 fitment\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268691820790,"sku":"DNND280-0019","price":519.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/a83e003463f2c0531359a07f4a2a5d78L.jpg?v=1784135479"}],"url":"https:\/\/autotecknic.com\/collections\/dinan.oembed?page=8","provider":"AutoTecknic USA","version":"1.0","type":"link"}