{"title":"Dinan Coilovers","description":"\u003cp\u003eDinan adjustable coilover systems let you set ride height and damping on BMW M cars. Fitments include the F87 M2 and M2 Competition, the F90 M5 and the G80 M3 and G82 M4.\u003c\/p\u003e\n\u003cp\u003eCoilovers need a professional install and a four-wheel alignment. Check the fitment notes on each listing, or send us your VIN and we will confirm the right part. See all \u003ca href=\"\/collections\/coilovers\"\u003ecoilovers\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"dinan-adjustable-coilover-suspension-bmw-f87-m2","title":"Dinan High Performance Adjustable Coilover Suspension - BMW F87 M2 \/ M2 Competition (2016-2021)","description":"\u003cp\u003eThe F87 M2 is already one of the best driver's cars BMW has built. But from the factory it sits high, rolls more than it should in quick transitions, and leaves a wheel gap you can park a fist in. You want it lower and flatter without trading away the ride you live with every day.\u003c\/p\u003e\n\u003cp\u003eThe Dinan High Performance Adjustable Coilover Suspension for the BMW F87 M2 and M2 Competition gives you threaded collars for precise ride height adjustment, springs that are nearly 18% stiffer in front and 5% stiffer in the rear, and Dinan progressive bump stops that keep the ride civilized at a lower height.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow the Dinan F87 M2 Coilovers Stay Livable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDinan lets you drop the car up to 1 in. in front and 1.5 in. in the rear, depending on tire clearance. For a street car, Dinan recommends 3\/4 in. front and 1\/2 in. rear, and that is where the ride stays comfortable. Rear helper springs keep the suspension working properly in droop, and the included packers let you tune bump stop clearance for comfort or grip, just like a race car setup. Stock upper spring mounts are retained, so there are no new clunks or squeaks.\u003c\/p\u003e\n\u003cp\u003eTo be clear on what this is: the kit adjusts ride height, not damping. It works with the factory non-adaptive shocks. Components are machined from 6061-T6 aluminum and black anodized for corrosion protection. Dinan part number D190-8701. Sold by AutoTecknic, an authorized Dinan dealer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo front springs and two rear springs\u003c\/li\u003e\n  \u003cli\u003eTwo rear helper springs with spring dividers\u003c\/li\u003e\n  \u003cli\u003eTwo front threaded perch assemblies\u003c\/li\u003e\n  \u003cli\u003eTwo rear spring mount assemblies\u003c\/li\u003e\n  \u003cli\u003eEndlink mount kit (non-EDC)\u003c\/li\u003e\n  \u003cli\u003eCoilover hardware kit with progressive bump stops and suspension packers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThreaded collars for precise front and rear ride height adjustment\u003c\/li\u003e\n  \u003cli\u003eUp to 1 in. lower front and 1.5 in. lower rear; 3\/4 in. front and 1\/2 in. rear recommended\u003c\/li\u003e\n  \u003cli\u003eSprings nearly 18% stiffer in front and 5% stiffer in the rear\u003c\/li\u003e\n  \u003cli\u003eDinan progressive bump stops with adjustable packers\u003c\/li\u003e\n  \u003cli\u003eRear helper springs for correct droop behavior\u003c\/li\u003e\n  \u003cli\u003e6061-T6 aluminum components, black anodized\u003c\/li\u003e\n  \u003cli\u003eRetains stock upper spring mounts for quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits the following BMW M2 models without adaptive dampers:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW M2 \/ F87 Coupe (2016-2018): M2 (N55)\u003c\/li\u003e\n  \u003cli\u003eBMW M2 Competition \/ F87 Coupe (2019-2021): M2 Competition (S55)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot compatible with cars equipped with EDC or Adaptive M Suspension (option 2VF). The M2 CS requires additional Dinan parts D112-0066, D112-0067, D671-0192 and D671-0196. Does not fit the G87 M2.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDinan quotes 9.2 hours of labor, and a professional alignment to Dinan's specifications is required. This is a shop install for most owners.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eRemove and disassemble the front struts, then fit the Dinan endlink mounts and threaded perches to the factory shocks.\u003c\/li\u003e\n  \u003cli\u003eInstall the rear bump stops and Dinan spring mounts onto the rear shocks.\u003c\/li\u003e\n  \u003cli\u003eInstall the springs and helper springs and set the collars to mid-range as a starting height.\u003c\/li\u003e\n  \u003cli\u003eReinstall the assemblies, drive to settle the suspension, then check bump stop clearance and set packers to 0.75 in. front and 0.50 in. rear.\u003c\/li\u003e\n  \u003cli\u003ePerform a four-wheel alignment to Dinan's published specifications.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42604147507446,"sku":"D190-8701","price":1599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/products\/d190-8701_2_1024x1024_36681825-b313-441d-82eb-27dff0ba8519.jpg?v=1645535233"},{"product_id":"dinan-adjustable-coilover-suspension-system-bmw-f90-m5","title":"Dinan High Performance Adjustable Coil-Over Suspension System - BMW F90 M5 (2018-2023)","description":"\u003cp\u003eThe F90 M5 is a twin-turbo V8 sedan that will run with sports cars, and it sits like a luxury car doing it. Too much wheel gap, too much body roll when you lean on it in a fast corner. Most owners do not want a harsh race setup to fix that. They want the M5 to look and feel like the M car it is, and still ride like one on the way to work.\u003c\/p\u003e\n\u003cp\u003eThe Dinan High Performance Adjustable Coil-Over Suspension System for the BMW F90 M5 does exactly that. It keeps your factory electronic shocks and replaces the springs with a Dinan-engineered setup that is 20% stiffer in front and 15% stiffer in the rear, with threaded collars that let you set ride height anywhere up to 2 in. lower in front and 2-1\/8 in. lower in the rear.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow the F90 M5 Adjustable Coilover System Works\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the factory adaptive dampers stay, your drive modes still work and the car keeps its compliance on rough roads. Dinan also converts the rear from the stock progressive-rate spring to a linear-rate spring, which makes the car more predictable at the limit and reduces body roll. Helper springs keep everything seated at full droop, and the stock upper spring mounts are retained for quiet operation.\u003c\/p\u003e\n\u003cp\u003eHow low should you go? The system allows up to 2 in. front and 2-1\/8 in. rear, but Dinan recommends 1 in. front and 1-1\/8 in. rear to keep the civilized ride the M5 is known for. Suspension packers and progressive bump stops are included so you can tune bump stop engagement to your ride height and your preferred balance of comfort and control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCoilover Install, Clearance and Alignment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a professional-level job. Dinan rates it at 9.2 hours of labor, and the installer must confirm tire clearance at your chosen ride height, especially if you run aftermarket wheels or tires. Plan on a wheel alignment after the car is set to its final height. It is a suspension part with no effect on emissions. Dinan part number D190-0901. Sold by AutoTecknic, an authorized Dinan dealer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDinan performance springs, front and rear\u003c\/li\u003e\n  \u003cli\u003eThreaded height-adjustment collars\u003c\/li\u003e\n  \u003cli\u003eFront and rear helper springs\u003c\/li\u003e\n  \u003cli\u003eProgressive bump stops\u003c\/li\u003e\n  \u003cli\u003eSuspension packers for bump stop tuning\u003c\/li\u003e\n  \u003cli\u003eMachined 6061-T6 aluminum components, black anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRetains the factory electronic shocks and M drive mode control\u003c\/li\u003e\n  \u003cli\u003eSpring rates 20% stiffer front and 15% stiffer rear\u003c\/li\u003e\n  \u003cli\u003eRear converted from progressive to linear rate for more predictable handling\u003c\/li\u003e\n  \u003cli\u003eAdjustable drop up to 2 in. front and 2-1\/8 in. rear\u003c\/li\u003e\n  \u003cli\u003eDinan recommended setting: 1 in. front, 1-1\/8 in. rear\u003c\/li\u003e\n  \u003cli\u003eHelper springs keep the springs seated at full droop\u003c\/li\u003e\n  \u003cli\u003eStock upper spring mounts retained for quiet operation\u003c\/li\u003e\n  \u003cli\u003e6061-T6 aluminum components, black anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits the following BMW M5 models with factory electronic shocks:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW M5 \/ F90 Sedan (2018-2023): M5\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDinan rates this install at 9.2 hours. Have it done by a shop experienced with F90 suspension work, and follow the Dinan instructions included with the kit.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eRaise and safely support the car, then remove the wheels.\u003c\/li\u003e\n  \u003cli\u003eRemove the front and rear strut and spring assemblies following BMW procedure.\u003c\/li\u003e\n  \u003cli\u003eTransfer the factory electronic shocks into the Dinan spring, collar, helper spring and bump stop assemblies, adding packers as directed.\u003c\/li\u003e\n  \u003cli\u003eReinstall the assemblies and set ride height with the threaded collars, starting from Dinan's recommended 1 in. front and 1-1\/8 in. rear.\u003c\/li\u003e\n  \u003cli\u003eCheck tire clearance at full lock and full compression, then have a wheel alignment performed.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268686872822,"sku":"DNND190-0901","price":1438.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/fb537dac4b094f9e776b6d40644be0d3L.jpg?v=1784135423"},{"product_id":"dinan-adjustable-coilover-suspension-bmw-g80-m3-g82-m4","title":"Dinan Adjustable Coilover Suspension System - BMW G80 M3 \/ G82 M4 (2021-2026)","description":"\u003cp\u003ePush a G80 M3 or G82 M4 hard on a cold back road and you know the feeling. The front is planted, the rear is nervous, and the traction light is doing more work than you'd like. Stock ride height doesn't help. It leaves a gap over the tires that looks like the car is still in transit.\u003c\/p\u003e\n\u003cp\u003eDinan's Adjustable Coilover Suspension System for the BMW G80 M3 and G82\/G83 M4 fixes both, without throwing away the factory adaptive dampers you already paid for. You get threaded ride height adjustment and a spring package tuned to make the car more neutral, not just lower.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy the Dinan Adjustable Coilover System Works Differently\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMany lowering kits just stiffen everything. On a G8X that makes the rear even looser. Dinan went the other way. The front springs are 15% stiffer to cut body roll, while the rear springs are 10% softer and switched from the factory progressive design to dual-rate. The softer rear finds more grip and stays composed at the limit, so the car rotates when you ask and stays put when you don't.\u003c\/p\u003e\n\u003cp\u003eYour factory electronic shocks stay in place and keep working with every drive mode. That is also why the price is a fraction of a full aftermarket coilover: you are not paying to replace BMW's excellent adaptive dampers. Threaded collars let you set ride height yourself, Dinan-spec progressive bump stops protect the shocks at the lower settings, and suspension packers let you tune bump travel. Hard parts are machined 6061-T6 aluminum, black anodized.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDinan Adjustable Coilover Ride Height Range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDrop the car up to 1-1\/8\" in front and 2-1\/4\" in the rear. For the best balance of ride and stance, Dinan recommends 3\/4\" (M4) or 7\/8\" (M3) lower in front and 3\/4\" lower in the rear. Running bigger wheels or a track setup? The system can also raise the car up to 1\/2\" in front and 1-1\/4\" in the rear over stock. Dinan part number D190-8210. Sold by AutoTecknic, an authorized Dinan dealer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront performance springs, 15% stiffer than stock\u003c\/li\u003e\n  \u003cli\u003eRear dual-rate performance springs, 10% softer than stock\u003c\/li\u003e\n  \u003cli\u003eThreaded ride height adjustment collars, front and rear\u003c\/li\u003e\n  \u003cli\u003eDinan-spec progressive bump stops\u003c\/li\u003e\n  \u003cli\u003eSuspension packers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRetains factory electronic shocks and all drive mode settings\u003c\/li\u003e\n  \u003cli\u003eFront springs 15% stiffer for less body roll\u003c\/li\u003e\n  \u003cli\u003eRear springs 10% softer and converted to dual-rate for more rear grip\u003c\/li\u003e\n  \u003cli\u003eUp to 1-1\/8\" lower front and 2-1\/4\" lower rear\u003c\/li\u003e\n  \u003cli\u003eCan raise up to 1\/2\" front and 1-1\/4\" rear over stock\u003c\/li\u003e\n  \u003cli\u003eThreaded collars for owner-adjustable ride height\u003c\/li\u003e\n  \u003cli\u003eStock upper spring mounts and isolators retained for quiet operation\u003c\/li\u003e\n  \u003cli\u003e6061-T6 aluminum components, black anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits the following S58-powered BMW M models:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW M3 \/ G80 Sedan (2021-2026): M3, M3 Competition, M3 Competition xDrive\u003c\/li\u003e\n  \u003cli\u003eBMW M4 \/ G82 Coupe (2021-2026): M4, M4 Competition, M4 Competition xDrive\u003c\/li\u003e\n  \u003cli\u003eBMW M4 \/ G83 Convertible (2022-2026): M4 Competition xDrive Convertible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDoes not fit the G87 M2. M3 CS and M4 CSL fitment is not confirmed. Contact us before ordering for those cars.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a professional-level job. Dinan quotes 9.2 hours of labor, and it requires spring compressors and a lift. Plan on a four-wheel alignment after setting ride height. At lower settings, check tire clearance through full steering lock and suspension travel, especially with non-stock wheels or tires.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eRaise and support the car, then remove the wheels.\u003c\/li\u003e\n  \u003cli\u003eRemove the front struts and rear springs following the Dinan instructions, keeping the factory electronic shocks.\u003c\/li\u003e\n  \u003cli\u003eInstall the threaded collars, Dinan springs, progressive bump stops and packers on the factory shocks.\u003c\/li\u003e\n  \u003cli\u003eReinstall the assemblies with the factory upper mounts and isolators, then set your target ride height on the collars.\u003c\/li\u003e\n  \u003cli\u003eSettle the suspension, recheck ride height, verify tire clearance, and complete a four-wheel alignment.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51268686938358,"sku":"DNND190-8210","price":1053.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2674\/6278\/files\/a27f35f86629753650a9a8773acbc3bdL.jpg?v=1784135424"}],"url":"https:\/\/autotecknic.com\/collections\/dinan-coilovers.oembed","provider":"AutoTecknic USA","version":"1.0","type":"link"}